Zhangjiagang Jin Machine Co., Ltd.
Zhangjiagang Jin Machine Co., Ltd.
Add to Cart
Pet Flakes Crystallizing With CE Certificate For Plastic With 304 Stainless Steel
Working principle
In the drying process, hot ait with constant temperature is blown by a blower into a hopper to dry the materials.
Moisture will be separated out and taken away by hot air, thus to gain a satisfied drying effect.
Air blown out of blower became high temperature drying air after being heated. Through screen protector and hole sceen, hot air can be equably dispersed in the material of storage tank. Hot air recycler is optional so the air enter drying blower after being filtered to form a closed loop circle and save electricity.
Standard configuration
1. All material contact parts are made of stainless steel to eliminate material contamination.
2. Stainless steel mirror surface hull features with pleasant appearance and no color-changing for a long-term use.
3. Hinged hopper construction for easy opening and easy cleaning.
4. Low noise blower.
5. Both material tank and base installed with material-viewing window.
6. Curve heating cylinder designed to avoid the burning caused by powder pile.
7. Installed with proportional deviation display thermostat,to control temperature accurately.
8. Adopts heat-insulated blower to prolong blower lifespan.
9. Overheat and overload protector are standard equipment.
Accessary optional
Hot air recyclers
Work with hopper dryer to make the hot air form a semi-hermetic circulated loop and has feature as below:
Material storage tank
Customized tank available for all sized of stainless steel hopper.
Dust collector
Additional dust collector installed to avoid plastic particles splashing and provide a clean environment.
Magnetic separator
Inserts at the lower cone bottom, filter out iron mixed with raw materials, optional model available.
Suction box
For standing type hopper dryer, easy for material suction and discharge.
Support frame
Customized a variety of special structure frame for hopper dryer.
Application Area
| Drying material | Moisture content | drying time(H) | Dry temperature() | DRA-30ZL -KS |
P-50 -KS |
P-100 -KS |
D-400 -KS |
D-800 -KS |
D-1600 -KS |
|
| initial period | Drying period | |||||||||
| ABS | 0.4 | 0.08 | 2~3 | 80 | 12 | 50 | 100 | 200 | 400 | 800 |
| PA6 | 0.6 | 0.1 | 4~6 | 75 | 10 | 40 | 80 | 160 | 320 | 640 |
| PA6.6 | 0.6 | 0.1 | 4~6 | 75 | 10 | 40 | 80 | 160 | 320 | 640 |
| PC | 0.3 | 0.02 | 2~3 | 120 | 12 | 50 | 100 | 200 | 400 | 800 |
| PE | - | - | 1~2 | 80 | 15 | 60 | 120 | 240 | 480 | 960 |
| PEB | 0.3 | 0.05 | 3~5 | 90 | 10 | 40 | 80 | 160 | 320 | 640 |
| PET | 0.3 | 0.01 | 4~6 | 150 | 10 | 40 | 80 | 160 | 320 | 640 |
| PBT | 0.3 | 0.01 | 3~5 | 150 | 10 | 40 | 80 | 160 | 320 | 640 |
| PMMA | 0.5 | 0.05 | 3~5 | 80 | 10 | 40 | 80 | 160 | 320 | 640 |
| POM | 0.2 | 0.03 | 2~3 | 100 | 11 | 50 | 100 | 200 | 400 | 800 |
| PP | - | - | 1~2 | 90 | 15 | 60 | 120 | 240 | 480 | 960 |
| PPO | 0.2 | 0.03 | 2~3 | 120 | 12 | 50 | 100 | 200 | 400 | 800 |
| PS | - | - | 1~2 | 80 | 15 | 60 | 120 | 240 | 480 | 960 |
| PUR | 0.5 | 0.03 | 3~5 | 90 | 10 | 40 | 80 | 160 | 320 | 640 |
| PVC | 0.2 | 0.05 | 2~3 | 80 | 12 | 50 | 100 | 200 | 400 | 800 |
| SAN | 0.2 | 0.05 | 2~3 | 80 | 12 | 50 | 100 | 200 | 400 | 800 |
| OETG | 0.3 | 0.05 | 4~6 | 65 | 10 | 40 | 80 | 160 | 320 | |
| PPS | 0.2 | 0.02 | 3~5 | 150 | 10 | 40 | 80 | 160 | 320 |
|